Language: English Indonesia

Balometer, Kett - KJT Near Infra Red Moisture Meter

(Product Photo) The Balometer measured the volumetric air inflow rate through the 2' x 2' sections of the filters in the ceiling of the booth. These measurements were summed to obtain the total volume of air entering the booth. The hot wire anemometer was used to measure the air velocity at the booth's inflow filters, exhaust filters, and at several points near the vehicle. Five-point traverses were made across each exhaust filter and 8-point traverses across each inflow filter. The velocity across each filter was averaged and the flow determined and summed to obtain the total inflow and exhaust in each booth. The velocity at several points, 18" from the vehicle's surface, were also measured. Smoke tubes were used to trace the air flow patterns in the spray painting booth. An inclined manometer was used to measure the static pressure in the booth during normal painting operations. The sizes of the Balometer Jr. Capture Hood is ideal for tight spaces such as above office cubicles and in restrooms. This instrument stands only 21 inches high with the smaller hood. The easily observed trend values and fast meter response make the Balometer Jr. hood the an excellent choice for test and balance professionals. The analog display makes this hood easy to use, minimizing the amount of training needed to make accurate measurements. - range : 0-1400 cfm (0-2400 m3/hr, 0-660 l/s) - accuracy : ±5% of full scale (supply and exhaust) - measurement units : cfm, m3/h, or l/s - display : precision-balanced analog meter movement - instrument weight : 6.9 lb (3.1 kg) with a 2 ft x 2 ft (610 mm x 610 mm) hood attached - hood sizes : 2 ft x 2 ft (610 mm x 610 mm) or 16 in. x 16 in. (406 mm x 406 mm) Request for Quote Your inquiry will be recorded in "Member Trade Mail". Recommend to your friends